An applicator roller is specified, which is supposed to apply an adhesive film evenly to a workpiece. The roller is fixed and centerd to the counterpart. Holes (stepped holes) must be described. Another challenge is specifying the non-cylindrical application area.

Variants two and three provide further options for specifying hole patterns (stepped holes), as well as a much more precise description of the non-cylindrical application area using several new modifications out from the latest edition of ISO 5459:2024.

Length of explanation video (Step by Step guide) : Approx. 40 min.

Variants:Yes - 3 Variants

Difficulty Level:
Variant 1: Suitability 1-2 | Variant 2 and 3: Suitability 2-4

Description of the level of difficulty (suitability for the user):

1 – The user has basic knowledge but has not yet used ISO GPS frequently in practice and takes first steps.

2 – The user has basic knowledge but is not proof about using ISO GPS and would like to gain more general confidence.
More „special“ or complex modifiers (these are usually listed in the example description) are applied selectively.

3 – The user has sufficient knowledge, can already use frequently used ISO GPS tools without difficulty,
and would like to deepen knowledge selectively based on typical functional descriptions,
which is usually also product-specific (e.g., snapping features (latching hooks) on a plastic injection-molded part, special demand hole patterns, i.e. multi-level patterns etc.)
used in the example (i.e., listed in the description) (e.g., direction only or certain combinations of dimensional tolerancing, as well as SIM or similar modifications).

4 – The user has extensive knowledge, has been working with ISO GPS for a long time,
and would like to learn about very specific applications or modification operations, which usually describe more complex functional requirements and products.
This requires, for example, situation features, reference elements, filter information, association modifiers etc.